Part 1
Quick tour of the Network Monitoring setup
Network Monitoring/Sniffing using vSphere and PRTG - Part 1 from Richard Vimeo on Vimeo.
Part 2
Setup VM
Setup Switch
Setup Vlan trunk (switch,port group,vSwitch)
Installing PRTG
Network Monitoring/Sniffing using vSphere and PRTG - Part 2 from Richard Vimeo on Vimeo.
5 comments:
Which version of ESX/vSphere are you using? I'm trying something similar on vSphere 4.0.0 build-261974, but promiscuous mode doesn't seem to be working. On ESX / Configuration / Networking, I have a virtual switch, and both the switch and port groups set with Promiscuous ACCEPT, but inside my VM with Wireshark running, I only see sporadic broadcast traffic.
However, when I take the network cable from the ESX host and plug it into my laptop with Wireshark, I can see all the traffic on the network.
This site use full to all around the would, use it develop both.........
this site use of all the would and system news and helps known every one...........
Networking Setup Melbourne
It should work perfectly even with vSphere 4.0. I have rested with older version as well, check your configuration one more time, or you can try with Oidview Network Monitoring tool.
Help full video and good method for explanation by by part one and part 2 video thanks for sharing network monitoring
Post a Comment