This lab details setting up NAT on vyatta routers, OpenVPN with TLS authentication, basic firewall setup and all the steps inbetween.
Here is the video:
Vyatta Remote Access OpenVPN lab with NAT and Firewall setup from Richard Vimeo on Vimeo.
Enjoy!
Vyatta Remote Access OpenVPN lab with NAT and Firewall setup from Richard Vimeo on Vimeo.
7 comments:
excelent tutorial, just what i've been looking for my vmware lab!
thanks!!
Bit of a newbe question, but why are you using a second Vyatta router at R10? I'm trying to set this up with a single VPN1 and a laptop coming in through the internet. Is that wrong?
What would I have to change to do this?
I am using a second router R10 so that you can get practise using things like NAT and setting up a vyatta router in general. It is also there to simulate that you will never, outside of a lab be directly connected to the vyatta box.
That being said, you dont really need it, its not wrong to remove it and will work perfectly without it.
However I would recommend you keep the lab as it is and get everything working, then once you are confident then start chopping and changing things.
Thanks for that...
Now that I have it all set up like yours, I want to connect over the internet. What do I need to do here? I have to set up NAT and a firewall, I guess. I have already set these up for my web server...what do I need to do for OpenVPN?
Thanks
Excellent tutorial.. I was trying to setup a VPN solution to my home network and this has helped a great deal. Keep up the great work!
Thank you for the tut. Well laid out and clear with regard to each individual step.Very helpful seeing as I now have remote access and it works well.
Post a Comment